Change the oil and filter. Run it for a minute or so, not long. Do the same thing again. Look at the oil the second time and if it still looks bad, keep doing it until it looks good. Should be fine. Just do not run it for very long at a time. You might want to use cheap oil for the flushes and use some engine flush too. Should be around the oil or oil additives. Then I would put some good oil in it and run it for an hour or so and look at the oil. If it looks bad, change the oil and filter again.Boat partially sunk. MerCruiser 130 hp IO got some water in the oil stick and fill area. How do I fix?
ehh drain the old mixed ASAP%26amp; flush with oil flush before filling again do not start again untill u do this if it has a mesh oil fillter clean if its not change
Do what you were going to do. That should take care of it.
No comments:
Post a Comment